Bedspring Snowman Christmas Decoration

August 24, 2021August 24, 2021 by Cindy @ Upcycle Design Lab

A few months ago, I tore down an old mattress and box spring, and I saved all the springs. Since then, I’ve been wondering what to do with all of them. So today’s project has a quick and fun way to make a little bobblehead bedspring snowman Christmas decoration using recycled materials.

I missed Christmas in July, so now it’s all about Christmas in August. I’m not usually ready for Christmas until well after Thanksgiving, but I’m trying to prepare for a Christmas craft show this year, so I’m going all-in with Christmas stuff right now.

You can check out the quick video demo or scroll down for the step-by-step instructions.

Advertising Disclosure: Upcycle Design Lab may be compensated in exchange for featured placement of certain sponsored products and services or your clicking on links posted on this website.

Step 1 – Gather supplies for bedspring snowman Christmas decoration

The first thing you need to do is gather all your supplies. For this project, you will need the following.

One plastic water bottle
One 4 and a 1/2 ounce tin can (rusted)
One 22oz tin can (rusted)
A safety can opener
Tin snips or heavy cutters
White spray paint
Scissors
E6000 glue
Fabri-tac glue
A pen with removable cap
Small paintbrush
Orange acrylic paint
Small black buttons
Small red ribbon for Bow
Sand or rice or some other weighted material
Mod Podge
Old bed spring

Step 2 – Paint top of plastic water bottle.

Next, with the cap screwed on the empty water bottle, use the white spray paint to paint the top half of the plastic bottle.

Step 3 – Cut off bottle top

Once the paint is dry use the scissors to cut off the bottle top just past the curve on the bottle’s neck.

Step 4 – Preparing tin cans

To prepare the tin cans use the safety can opener to remove the lids and empty the contents of both cans. By using this can opener allows you to place the can lid back in the can and it leaves no sharp edges on the can or the lid.

Next, rust the metal cans. Check out this tutorial on how I quickly rust tin cans for all of my projects.

Step 5 – Fill small can

Fill the small can approximately halfway with your weighted material, rice, sand, etc. Then use the E 6000 glue to secure the lid back in place.

Step 6 – Glue cans

For this project, you will not need the larger can, but you will want the lid. First place the top on a flat surface with the edges curled upward and then use the E 6000 glue to attach the smaller can to the middle of the larger lid.

Step 7 – Glue plastic bottle to cans

Once the E6000 glue has had a chance to set, you can flip the can piece over and glue the plastic bottle to the center of the large can lid using more E6000 glue.

Step 8 – Add Bow

To make the bow you can use ribbon or fabric. Once the bow is complete secure it around the neck of the plastic bottle. Fabri-tac glue is suitable for this step as it dries quickly. But, E6000 glue can also be used for this step.

Step 9 – Attach Bedspring

Once the bow is in place use the E6000 glue to attach the bedspring to the underside of the snowman’s tin can top hat. Allow the glue to dry before proceeding to the next step.

Step 10 – Seal tin cans

Because the cans are rusted they will need to be sealed. To do this use a small paintbrush to apply a coat of mod podge to the rusted tin can pieces.

Step 11 – Finishing touches

Lastly, you can personalize your bedspring snowman Christmas decoration with some finishing touches. For my snowman, I drew on some small eyes with a pen, then I used the cap of a pen for the nose, and some small black buttons for the final details.

Finished bobblehead bedspring snowman Christmas Decoration.

So, he looks a little grumpy, doesn’t he?

Happy Upcycling,

Cindy

Because you are still here you might also like these other projects.

Advertising Disclosure: Upcycle Design Lab may be compensated in exchange for featured placement of certain sponsored products and services or your clicking on links posted on this website.